NukeSilo Community
https://forums.nukesilo.net/

Problem, of course
https://forums.nukesilo.net/viewtopic.php?f=29&t=4862		 Page 1 of 1
Author:  Maxwell Murder [ 19 Jun 2006, 11:54 ]
Post subject:  Problem, of course
I try to connect to any server on any STEAM game (at least the ones I've tried) and I get kicked out of the entire game after a short duration. In Nukesilo, I usually get kicked around 5 or 6 seconds of spawn time. Today, I did make it in temporarily, and it didn't kick me out of the game, even gave me a warning message, but I wasn't able to read it. Any clues, anybody?
Author:  aerocow [ 19 Jun 2006, 12:32 ]
Post subject: 
Do you have IE7B2 installed? AKA Internet Explorer 7 or Windows Vista?
Author:  Maxwell Murder [ 19 Jun 2006, 12:45 ]
Post subject: 
Nope
Author:  Maxwell Murder [ 21 Jun 2006, 19:14 ]
Post subject: 
My troubles with the game rage on...

Some updates in the case: I have had somewhat the same problem in DoD, only it has not closed the entire game on me. I am sometimes able to play for a minute or so on the TSRP server, but I still get kicked out, sometimes out of the server, sometimes out of the game. I tried reinstalling TS, and changing my character model like LLLL suggested, but they did not fix the problem. I also got an error message once tonight, while attempting to play on the server. It was something like CL_Parse_Version server protocol is 23489 (or some number like that) not 47.
Author:  Supernuker [ 21 Jun 2006, 19:33 ]
Post subject:  Router and Router Firmware Issues
Question

Error messages
    * Bad Parse in Client Command
    * Bad Command Character in Client Mod
    * Bad Command Character in Client Command
    * CMD_MAXBACKUP HIT
    * Fragment transmission aborted at 1/1
    * Host error: Bad server message
    * Host error: Cl_Entitynum: #### is an invalid number, Cl_max edicts is #### * Host_Error: CL_ParseServerMessage: Illegible server message - svc_bad
    * Host_Error: CL_Parse_Version: Server is protocol -######### instead of 47
    * Host_Error: DispatchUserMsg: User Msg CZCareer/130 sent too much data (195 bytes), 192 bytes max
    * Received fragment out of order
    * svc_bad Wrote erroneous message to buffer.dat Host_Error: UserMsg: Not Present on Client ###

Other Symptoms
I get booted after 30 seconds whenever I connect to a server


Answer

Known Causes
    * Most common: Bad or outdated router firmware (client-side)
    * Less common: Bad or outdated router firmware (server-side)

If your connection to most servers fails with one of the error messages listed above (or you experience the other symptoms), this is a firmware issue with your router.

If your connection to one server fails, it is likely a problem with the network the server you are trying to connect to is operating on.

Troubleshooting

If you have a stand-alone router, bypass your router and plug directly into your modem to see if the connection continues to fail.

Linksys BEFSR11, 41 and 81 routers seem to be causing this a great deal with the latest firmware version available from their website. If you have the BEFSR11 or 41 router, you need to run the 1.45.7 firmware to solve this problem. The current firmware version that Linksys has on their website: (1.45.11) and some older versions (before 1.45.7) of the firmware can cause these same problems. You can download the known good Linksys 1.45.7 firmware for both the BEFSR11 and BEFSR41 V2 routers at:

LinkSYS Firmware Update
ftp://ftp.linksys.com/pub/befsr41/befsr_fw_1457.zip

ActionTec DSL Modems which encounter this problem will need to be replaced, as no firmware update is available.

Recommended steps:
    1. Disable QoS and uPnP. You need to go into the router and disable UPnP and QoS if it's there, and you should only have TCP/IP checked in the network properties for your Internet connection.
    2. Disable Wireless Zero Service (included in Windows XP). You can access these settings in Control Panel > Administrative Tools > Services.

Routers with Known Issues

Actiontec DSL Modems
    * Internal PCI Home DSL Modem (Model # PCI0839-01 )
    * External USB Home DSL Modem (Model # UD800TP)
    * USB/Ethernet Home DSL Modem (Model # ED800T)
    * USB/Ethernet Home DSL Modem (With Routing Capabilities) (Model # R4500U)

Actiontec ADSL Gateways
    * Wireless-Ready DSL Gateway (Model # R1520SU)
    * Wireless-Ready DSL Gateway (Model # R1524SU)
    * Wireless-Ready DSL Gateway (Model # R1520SU)

Actiontec Broadband Routers: Cable/DSL Routers
    * 54 Mbps Wireless Cable/DSL Router (Model # GT704-WR)
    * Wireless Cable/DSL Router (Model # R3010SUW)
    * Wireless Cable/DSL Router (Model # R3010UW)
    * Wireless-Ready Cable/DSL Router (Model # R1020S(U))
    * Wireless-Ready Cable/DSL Router (Model # R1020S)
    * Dual Mode Wireless-Ready Cable/DSL Router (Model # R3020QU)

Others
    * Creative Labs BroadXent 8120 modem (5.0.0.16 17 November 2003)

Routers with Known Firmware Issues

Linksys BEFSR11 and BEFSR41 V2
    * Versions before 1.45.7
    * Version 1.45.11
    * Version 1.46.00

Linksys BEFSR81 ver.3
    * 2.50.2
    * 2.50.5
    * 2.54.5

Taken from the steam support page.
Author:  Maxwell Murder [ 21 Jun 2006, 19:50 ]
Post subject: 
Thanks Nuker and LLLL (via AIM).

However, it appears that my firmware had been updated when my father was on the computer, and it had been accessing the internet randomly. So, it appears, we will most likely be purchasing another router.
Page 1 of 1 All times are UTC-06:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/